Table of Contents
Advertisement
Chapter 3 Basic Setting and Operation
2
Registering and deleting E-mail addresses
Click "Add address" and type the e-mail
address onto the text box and click Set
button. To check the registered addresses,
click Check/Delete sub menu tab. The
addresses are listed as the figure on the
right.
✐ Up to 10 E-mail addresses can be registered.
To delete the registered addresses, check the
address you want to delete and click Delete
button.
3
Option selection for sending alert mail
Click Option sub menu tab. Check the con-
dition items under which alert mail will be
sent and click Set button.
Please refer to item "Examples :Type and
contents of alert mail" described on the next
page.
✐ "When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into
Standby in proper user operation" signifies that the projector is turned on by using the web browser
and then it is turned into standby with ON/STAND-BY button on the top control or the remote control.
Up to 99,999 hours can be set for use time.
✐
Check / Delete
Option
Advertisement
Table of Contents
