Table of Contents
Advertisement
Lenovo V110-15IKB Hardware Maintenance Manual
40
Figure 4. Removal steps of hard disk drive (continued)
Lift the IO board cable in the direction shown by arrow 3. Remove the screw
4.
d
c
Step
Screw (quantity)
M2 × 3 mm, Phillips head, nylok-coated (1)
4
HDD BRK TO UPPER
When installing: Make sure that the cable connector is attached firmly.
Detach the HDD connector in the direction shown by arrow 5. Remove the
hard disk drive from the slot in the direction shown by arrow 6.
f
When installing: Make sure that the HDD connector is attached firmly.
e
Color
Torque
Silver
1.85+/-0.15 kgf/cm
Advertisement
Table of Contents
