Hardware Maintenance Manual
1130 Integrated camera
For access, remove these FRUs in order:
• "1010 Base cover" on page 33
• "1020 Battery pack" on page 35
• "1030 PCI Express Mini Card for wireless LAN" on page 37
• "1040 SSD card" on page 39
• "1050 DIMM" on page 41
• "1060 Hard disk drive" on page 42
• "1070 Speakers" on page 44
• "1080 Fan and heat sink" on page 45
• "1090 IO board and backup battery" on page 48
• "1100 Upper case" on page 50
• "1110 System board" on page 52
• "1120 LCD unit" on page 54
Figure 13. Removal steps of integrated camera
Note: The integrated camera is stuck on the top center of the LCD cover.
Detach the camera connector in the direction shown by arrow 1.
Then remove the integrated camera and microphone boards in the direction
shown by arrows 2 and 3.
a
c
b
c
When installing: Stick the integrated camera to the top center of the LCD
cover and adjust its placement to make sure the connector is attached firmly.
58