Lenovo V110 Hardware Maintenance Manual page 51

Lenovo V110-14IAP/V110-14AST/V110-15ISK/V110-15IAP/V110-15AST
Figure 7. Removal steps of PCI Express Mini Card for wireless LAN (continued)
In step 1, unplug the jacks by using the removal tool antenna RF connector
(P/N: 08K7159), or pick up the connectors with your fingers and gently unplug
them in the direction shown by the arrows.
Notes: The wireless LAN card has 2 cables in step 1.
The wireless LAN card in some models might have 3 cables in step 1.
Step Screw (quantity)
M2 × 3 mm, Phillips head, nylok-coated (1)
2
WLAN CARD TO MB
Remove the card in the direction shown by arrow 3.
When installing:
• In models with a wireless LAN card that has two antenna connectors, plug
the black cable (1st) (MAIN) into the jack labeled MAIN, and the white cable
(2nd) (AUX) into the jack labeled AUX on the card.
• In models with a wireless LAN card that has three antenna connectors, plug
the black cable (1st) (MAIN) into the jack labeled 1, the grey cable (3rd) into
the jack labeled 3, and the white cable (2nd) (AUX) into the jack labeled 2 on
the card.
c
Color Torque
Black 1.85+/-0.15 kgf/cm
47