Lenovo ideapad FLEX 4-1470/ideapad FLEX 4-1435/ideapad FLEX 4-1480/ideapad
1080 IO board, DC-in cable
For access, remove these FRUs in order:
• "1010 Base cover" on page 33
• "1020 Battery pack" on page 36
• "1070 Fan assembly and Heat Sink assembly" on page 45
Figure 8. Removal steps of IO board, DC-in cable
Detach the IO board connector in the directions shown by arrows 1 and 2.
Remove the screw 3.
Step
Screw (quantity)
M2 × 3.5 mm, Phillips-head, nylok-coated (1)
3
io board---log up
When installing: Make sure that the connector is attached firmly.
FLEX 4-1570/ideapad FLEX 4-1580
a
b
Color
Silver
c
Torque
1.85+/-0.15kgf-cm
49