Lenovo ideapad 330 Hardware Maintenance Manual page 51

Lenovo ideapad 330-17IKB/ideapad 330-17IKB D/ideapad 330-17IKB U/
ideapad 330E-17IKB D/ideapad 330E-17IKB U/ideapad 330H-17IKB/
ideapad 330L-17IKB/ideapad 330E-17IKB/ideapad 330R-17IKB
Figure 8. Removal steps of fan assembly and Heat Sink assembly (continued)
Unplug the fan connector in the direction shown by arrow 2. Remove the
screw 3.
Step Screw (quantity)
M2 × 6 mm, Phillips head, nylok-coated (1)
3
fan---mb---log up & fan---log up
When installing: Make sure that the connector is attached firmly.
Remove the fan in the direction shown by arrow 4. Be careful not to damage
the connector.
c
b
Color Torque
Black 1.85+/-0.15 kgf/cm
d
47