Lenovo ideapad 330-15ICH Hardware Maintenance Manual page 40

Hardware Maintenance Manual
36
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
labels:
The following labels need to be peeled off from the old base cover and put on
the new base cover.
For countries other than China and India:
a Rating label 66 × 24mm
Rating label for print 43 × 24mm
b
OS label 16 × 22.5mm
c
d Office lable 17 × 21mm
e TW label 70 × 10mm
f Argentina label 68 × 6mm
Adapter label 65 × 20mm
g
h WL/BT label 35 × 15mm
i Indonesia label 32 × 10mm
j BIS label 22 × 30mm
k KCC label 50 × 16mm
For China and India:
a Rating label 33 × 24mm
Rating label for print 43 × 24mm
b
OS label 16 × 22.5mm
c
d Office lable 17 × 21mm
e TW label 70 × 10mm
f Argentina label 68 × 6mm
Adapter label 65 × 20mm
g
h WL/BT label 35 × 15mm
i Indonesia label 32 × 10mm
j BIS label 22 × 30mm
k KCC label 50 × 16mm
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.