Lenovo ideapad 130 Hardware Maintenance Manual
1080 Fan and heat sink assembly
42
For access, remove these FRUs in order:
• "1010 Optical drive" on page 32
• "1020 Base cover" on page 33
• "1030 Battery pack" on page 35
Figure 8. Removal steps of fan and heat sink assembly
Unplug the fan connector in the direction shown by arrow 1. Remove the
screw 2. Release the antenna from the cable guides.
Step
Screw (quantity)
M2 × 6 mm, Phillips head, nylok-coated (1)
2
FAN TO UPPER
Lift the fan in the direction shown by arrow 3.
Color
Torque
Silver
1.85±0.15 kgf*cm
3