Table of Contents
Advertisement
Lenovo IdeaPad U530 Touch Hardware Maintenance Manual
1120 LCD unit
For access, remove these FRUs in order:
• "1010 Battery pack" on page 33
Figure 11. Removal steps of LCD unit
Remove four screws
When installing:
• Route the antenna cables along the cable guides. As you route the cables,
• Make sure that the LCD connector is attached firmly and make sure that you
50
a
1
1
Step
Screw (quantity)
a
M2.5 × 5.0 mm, flat‐head, nylok‐coated (4) Black
make sure that they are not subjected to any tension. Tension can cause the
cables to be damaged by the cable guides, or a wire to be broken.
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
.
1
1
Color
Torque
2.5±0.2 kgfcm
Advertisement
Table of Contents
