Table of Contents
Advertisement
30
MAGIC REMOTE CONTROL FUNCTIONS
Registering Magic Remote Control
The Magic Remote Control operates by pairing with your
TV.
How to register the Magic Remote Control
To register automatically, turn the TV on and
press the
Wheel (OK). When registration is
completed, the completion message appears
on the screen.
If registration fails, turn the TV off and back on,
(Wheel)
then press the
registration.
How to Re-register the Magic Remote Control
1 Press and hold the
BACK
SMART
to reset, then register it by following "How
to register the Magic remote control"
above.
SMART
2 To re-register the Magic remote control,
press and hold the
seconds toward the TV.
How to use Magic Remote Control
1 You can move the pointer by moving the
remote up and down or left and right.
»
If the pointer does not work properly, wait
»
10 seconds and then try again.
2 If the pointer disappears, move the remote
control slightly to left or right. It will then
automatically appear on the screen.
»
If the pointer has not been used for a
»
certain period of time, it will disappear.
Wheel (OK) to complete
BACK and
buttons together for 5 seconds
BACK button for 5
1
2
If you press
Wheel (OK) on the Magic remote
control, the screen above opens.
1
It shows information about the current program
and screen.
2
You can select My Apps Menu.
Precautions to Take when Using
the Magic Remote Control
Use the Magic remote control within the maximum
y
»
communication distance (10 m, 32.8ft). Using the remote
control beyond this distance, or with an object obstructing
it, may cause a communication failure.
A communication failure may occur due to nearby devices.
y
»
Electrical devices such as a microwave oven or wireless
LAN product may cause interference, as these use the
same bandwidth (2.4 GHz) as the Magic remote control.
The Magic remote control may be damaged or may
y
»
malfunction if it is dropped or receives a heavy impact.
Take care not to bump into nearby furniture or other
y
»
people when using the Magic remote control.
Manufacturer and installer cannot provide service related
y
»
to human safety as the applicable wireless device has
possibility of electric wave interference.
It is recommended that an Access Point (AP) be located
y
»
more than 1 m (3.28 ft) away from the TV. If the AP is
installed closer than 1 m (3.28 ft), the Magic remote
control may not perform as expected due to frequency
interference.
Advertisement
Table of Contents
