1. Connection to the network
1.3 Manual network connection setting - Wireless LAN - (continued)
1.3.2 Wireless LAN connection set up
Using wireless LAN utility for Windows
Wireless LAN initial settings for the projector is as follows.
Connection Control
SSID
Channel
Encryption rating
IP address
* You can change these settings via a web browser on your computer or from the
menu of the projector. Refer to the item 3.1.3 Network Settings (&20) or
NETWORK menu in the Operating Guide.
1) Select "Change adapter settings" from the
menu on the left side of the "Network and
Sharing Center" window.
2) Right-click "Wireless Network Connection" to open the
menu, and select "Properties".
3) Select "Internet Protocol Version 4 (TCP/IPv4)" and click
[Properties].
(continued on next page)
12
7 standard.
®
: Ad-Hoc
: wireless
: 1
: None
: 192.168.10.254