Id Remote Control Function - Panasonic TH-65PB1U Operating Instructions Manual

Item
VIDEO WALL
UNIFORMITY

ID Remote Control Function

You can set the remote control ID when you want to use this remote control on one of several different displays.
Note:
To operate this function, please purchase ID remote controller sold separately.
Object model : EUR7636070R
1
Switch to
2
Press the button on the remote control.
3
Press one of
4
Press one of
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the ¿ rst two numbers become the ID number
for the remote control.
ID remote control button operation
The operation is the same as normal remote control except for the
ID Cancellation
Press button on remote control. (This has the same effect as pressing the
Notes:
• Set the Remote ID "On" to operate the ID remote control.
If Remote ID is set to "On", you can use the remote control without identical ID number during option menu display.
(see page 57)
• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is not
the same as the ID select number (see page 57).
Reduces the peak of brightness for each display to enable as uniform display as possible.
Select "OFF" or "ON".
Note:
If you set VIDEO WALL UNIFORMITY to ON, the following menus will be unavailable and
these settings will be ¿ xed to the initial values.
PICTURE menu: COLOR, TINT, INPUT LEVEL (ADVANCED SETTINGS)
on the right side.
- , for the tens digit setting.
- , for the units digit setting.
SETUP for MULTI DISPLAY
Details
The brightness depends on each
display's setting.
OFF
button.
The brightness difference is
minimized.
ON
, , buttons at the same time.)
49