Using Virtual Hall; Using Reverb - Casio CTK-4400 User Manual

Controlling the Keyboard Sounds
5.
Pressing co again to unsplit the keyboard (so it
plays only the tone you selected in step 1).
co
• Each press of toggles between split (two tones) and
unsplit (one tone).
• If you turn on both layer and split, layering will be applied to
the right side range of the keyboard only.
To change the split point
1.
While holding down
where you want the split point to be.
The key you press will become the lowest note of the right
side range of the split keyboard.
Example: Setting middle C (C4) as the split point.
Key name
C 4

Using VIRTUAL HALL

The VIRTUAL HALL function lets you instantly configure the
Digital Keyboard to play with the acoustic effect of a classic
concert hall.
1.
Press 3 (VIRTUAL HALL) to turn on the
VIRTUAL HALL function.
2.
To turn off the VIRTUAL HALL function, press
3 again.
The indicator will disappear when the VIRTUAL HALL function is
• The reverb setting turns off automatically whenever the
VIRTUAL HALL function is turned on. When you turn
off the VIRTUAL HALL function, the reverb setting will
return to whatever it was before you turned on the
VIRTUAL HALL function.
EN-16
co , press the keyboard key
Lights
turned off.

Using Reverb

Reverb adds reverberation to notes. You can change the
duration of the reverb.
1.
Press ct (FUNCTION) and then use the
(10-key) [4] (o) and [6] (p) keys to display
"Reverb" (page EN-7).
R e v e r b
2.
Use the br (10-key) [–] and [+] keys to select
the reverb setting you want.
Off (oFF)
Turns off reverb.
1 to 10 The larger the number selected, the longer
the reverb duration.
Indicator disappears when reverb is turned off.
• Changing the reverb setting (including turning it off)
while the VIRTUAL HALL function is turned on will turn
off the VIRTUAL HALL function.
br