Table of Contents
Advertisement
Installation Instructions
Start Up
Follow the steps below to get your TV connected and ready for watching.
1. Plug in Your TV—Plug the power
cord into the 2-prong outlet.
2. Hook Up Your TV — Connect the cable
or antenna to the provided connection on
the back of the TV.
Note: The TV antenna or cable wire is not
included with the television set. You need
to purchase an antenna if you are not
going to hook up cable service. If you
already have a cable service, connect the
existing cable wire that your local cable
company provided at the time of your
cable installation.
4. Turn On the TV — Press the
power button on the TV set or
remote control.
5. Place All Available Channels
in Memory — Press the menu button 5 times, for the
Preset menu. By selecting "Auto Search", it will set up
all available channels into the memory. If you want to
add or delete channels from memory, do so by going
into "Add/Delete" mode.
(Refer to the Preset menu)
Power button
9
Advertisement
Table of Contents
