Smeg ST8605 Installation And Operating Instructions Manual page 9

User instructions
After using the table to identify the most appropriate washing program:
• press the ON/OFF button (1) and wait for the PROGRAM
INDICATOR LIGHT (2) to illuminate;
• keep pressing the PROGRAM SELECTION button (3) until the
indicator light corresponding to the desired program illuminates;
• close the door; after about 2" the program will start. While it is in
progress, the relative LIGHT will flash (indicating that the program is
being executed).
PROGRAMME, LOAD CROCKERY
NUMBER & SYMBOL AND CUTLERY
Pans and dishes
1 SOAK
awaiting
a further wash
Wash immediately
NORMAL
after use for dishes
2
ECO (*)
with light dirt
Wash immediately
after use for dishes
3
ECO
with normal dirt
Dishes
4
NORMAL
with normal dirt
Very dirty pans and
5
INTENSIVE
dishes (except
delicate items)
Only run the soak program with half loads.
The HALF LOAD option (6) is available for all programs except the soak program.
(*) Reference program as AS/NZS 2007 (ECO).
–
( ) Not present.
(1) Average power consumption with the softener set on level 2.
(2) The cycle duration and power consumption may vary according to the water and
room temperatures, and the type and amount of dishes.
The washing cycle will not take place if the dishwasher door is left open
or not properly closed.
DURATION
PROGRAM
PROGRESS
MINUTES
(2) LITRES (1)
12'
Cold prewash
Cold prewash
Wash at 40°C
Cold rinse 123'
Rinse at 45°C
Dry
Wash at 55°C
Cold rinse
80'
Rinse at 68°C
Dry
Cold prewash
Wash at 65°C
95'
Cold rinse
Rinse at 68°C
Dry
Prewash at 45°C
Wash at 70°C
115'
2 cold rinses
Rinse at 70°C
Dry
CONSUMPTION
WATER POWER
KWh (2)
_
7
16,9 0,75
18 1,20
20 1,40
22 1,80