If using WEP Data Encryption
If WEP data encryption has been enabled on the Wireless ADSL Router, Windows will detect
this, and show a screen like the following.
To connect:
•
Enter the WEP key, as set on the Wireless ADSL Router, in the Network Key field.
•
Re-enter the WEP key into the Confirm Network key field.
•
Disable the checkbox Enable IEEE 802.1x authentication for this network.
•
Click the Connect button.
If this fails, click the Advanced button, to see a screen like the following:
Select the SSID for the Wireless ADSL Router, and click Configure, to see a screen like the
following:
20