Sanyo VPC-T700EX Instruction Manual page 50

3. If you select [Select] in the previous step, the figure shown on the
right hand side will appear.
Select the image that you want to print with the
Select the [Print Num] (up to 99) with the
After selecting the desired image and printing number, press
the SET button to confirm.
4. Select [Exit] with the
5. Select [Print] with the
start printing.
6. The printing starts and the figure shown on the right hand side
appears.
The [COMPLETE] will be displayed temporarily, reminding you
that the printing procedure is finished.
If a print error is detected, the [PRINT ERROR] will be displayed.
EN-56
buttons, and press the SET button.
/
buttons, and press the SET button to
/
buttons.
/
/ buttons.
Select
105-0003 SET:Enter
Images
SET:Enter
SET:Enter
PictBridge
PRINTING