Optical Drive - HP ProBook 4430s Maintenance And Service Manual

Optical drive

NOTE: All optical drive spare part kits include an optical drive bezel.
Description
Blu-ray BD-R/RE DVD±RW SuperMulti DL Drive
Blu-ray ROM DVD±RW SuperMulti DL Drive
DVD±RW and CD-RW SuperMulti DL Combo Drive
DVD-ROM Drive
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the bottom door (see
Remove the optical drive:
1. Position the computer upside-down with the right side toward you.
2. Remove the Phillips PM2.5×4.0 screw (1) that secures the optical drive to the computer.
3. Push the optical drive tab (2) to release the optical drive from the computer.
Battery on page 48).
Bottom door on page 50).
Component replacement procedures
Spare part number
647947-001
647948-001
647946-001
647945-001
51