Table of Contents
Advertisement
If...
In Review mode,
you do not see a
picture (or the
expected picture)
on the LCD screen.
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
Shutter button
does not work.
Picture is too light.
Picture is not clear.
Picture is too dark.
www.kodak.com/go/support
Try one or more of the following
I
Check the image storage location setting
I
Transfer the picture to the computer (see
card in the camera
Caution: Formatting a card deletes all pictures and videos,
including protected files.
I
Turn on the camera (see
I
Transfer pictures to the computer (see
the camera (see
page
24), or insert a card with available memory (see
I
Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
I
Decrease Exposure Compensation (see
I
Clean the lens
(see page
I
Make sure your camera is not in Close-up mode.
I
Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
I
Place the camera on a flat, steady surface or use a tripod.
I
Turn on the flash (see
I
Move so there is no more than 11.8 ft (3.6 m) in wide angle and
6.9 ft (2.1 m) in telephoto between the camera and the subject.
I
Use Fill flash
(see page
behind the subject.
I
Increase Exposure Compensation (see
(see page
26).
page
2).
page
14), switch image storage locations
50).
page
7).
7) or change your position so light is not
Troubleshooting
(see page
24).
page
36), then format the
page
36), delete pictures from
page
page
27).
page
27).
(see
3).
41
Advertisement
Table of Contents
