Memorex MPH 6988 Manual page 29

Color profile: Disabled
Composite Default screen
NOTE
If you select No, then the
Caller ID screen returns.
I:\Mph6988 second lot\MPH6988 OM.vp
Thu Jul 29 17:10:37 1999
Storing a Caller ID Number Into a Memory Location
1) Press , and the Caller ID
CALLER ID
summary screen appears. The screen
shows the number of new callers and
the total number of callers stored in
Caller ID memory.
2) Press ; or : to find the number that
you would like to store, then press
MEM to store the selection.
3) The select location screen appears. Use
the : and ; keys to select a blank
memory location where you would like to
store the number. (If you want to replace
an existing number with the Caller ID
number, skip to step 5.)
4) Press . A confirmation tone sounds, and the number is
SELECT
programmed. (Do not complete steps 5 and 6.)
5) If you choose to replace an existing
number with the Caller ID number,
press , and the following
SELECT
screen appears.
6) Use the : key to move the cursor to
confirmation tone sounds, and the number is programmed.
Deleting a Caller ID Number
To delete a single Caller ID message, follow the steps below.
1) Press , and the Caller ID
CALLER ID
summary screen appears. The screen
shows the number of new callers and
the total number of callers stored in
Caller ID memory.
2) Select the number that you would like to
delete. Press ; to scan forward and : to
scan backwards through the list.
New : 01
Total : 02
12/21 12:30PM 03
Schlitz Kaysie
305-555-1212
Select Location
1> KAYSIE SCHLITZ
2 MEMOREX
Replace Memory?
Yes
> No
and press . A
Yes
SELECT
New : 01
Total : 02
12/21 12:30PM 03
Schlitz Kaysie
305-555-1212
29