Setting Up - LG XB64-D0U Owner's Manual

XB64-D0U-ADEULL-ENG 11/8/10

Setting up

Connecting your unit to your TV and aerials.
Connect jacks on the unit and your TV (DVD player or Digital Device etc.) using the cables.
Check the jacks of your TV and choose the A, B connection. Picture quality improves in order from A to B.
a Stretch the FM aerial.
The reception will be at its best when the end of the
aerial is stretched to be in a straight line and
horizontal.
b Component Video connection (B)
Connect the COMPONENT VIDEO (PROGRESSIVE
SCAN) OUTPUT jacks on the unit to the
corresponding input jacks on your TV using a Y PB
PR cable.
- If your TV accepts progressive format signals, you
must use this connection and set [Progressive
Scan] in [Display] setup to [On]
(See page 8).
NOTES:
• If TV screen becomes discolored do not place speakers within 30cm from TV.
• Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –. If the
cords are reversed, the sound will be distorted and will lack base.
4
9:45 AM Page 4
FM - aerial
a
c Video Out connection
d Connect the speaker cables to the
e
b
c
e SCART connection
d
A)
(
Connect the VIDEO
OUTPUT(MONITOR) jack on the
unit to the corresponding input jack
on your TV using a Video cable.
player
To connect the cable to the unit,
press each plastic finger pad to
open the connection terminal. Insert
the wire and release the finger pad.
Connect the black end of each wire
to the terminals marked -(minus)
and the other end to the terminals
marked + (plus).
Connect the TO TV jack on the unit
and your TV using the SCART
cable.