Table of Contents
Advertisement
3) WPS
Wi-Fi Protected Setup (WPS) is the simplest way to build connection between
wireless network clients and this ADSL router. Press this button on the router
and enable WPS function of the wireless clients, the router and clients will
automatically configure the security key and connect directly. Please note that
the router will wait for WPS requests from wireless clients in 2 minutes after
the WPS button is pressed.
4) Power Jack
Please plug the power adapter attached with the ADSL Router to the power
jack. The power adapter is 12V.
5) Local Area Network (LAN)
The router's 4 LAN ports are where you connect your LAN's PCs, printer
servers, hubs and switches etc.
6) ADSL
Connect the supplied RJ-11 telephone line to this port and your
ADSL/telephone network.
1.4.2. Front LEDs
On the router's front panel there are LED lights that inform you of the router's
current status. Below is an explanation of each LED and its description.
LED
PWR (Green)
WLAN (Yellow)
WPS (Yellow)
ADSL (Green)
Light Status
On
Off
Blinking
Off
Blinking
On
Description
The router is ready
Wireless LAN is disabled
Wireless traffic is transmitting or receiving
WPS function is disabled
WPS function is enabled
Connected to an ADSL DSLAN successfully
5
Advertisement
Table of Contents
