Unfolding The Handle - Toro 20073 Operator's Manual

Setup
Important: Remove and discard the protective
plastic sheet that covers the engine.

1. Unfolding the Handle

Folding or unfolding the handle improperly can
damage the cables, causing an unsafe operating
condition.
•
Do not damage the cables when folding or
unfolding the handle.
•
If a cable is damaged, contact an Authorized
Service Dealer.
1. Carefully move the upper handle forward until the
handle halves are in line and nest together, and tighten
the handle knobs ( Figure 3).
Figure 3
2. Squeeze the lower handle together and move the handle
rearward until it clicks into the operating position
(Figure 4).
Figure 4
6