Compass Preferences - TomTom Daihatsu Reference Manual

Tap this button to select a car symbol that will be used to show your current
position in the Driving view.
Change car
symbol
Change 2D/3D display / Turn on 2D display
Tap Turn on 2D display to change the perspective for viewing the map.
For example, the 2D view shows a two dimensional view of the map as
though viewed from above.
Turn on 2D
display
To switch the view to a three dimensional perspective, tap Change 2D/3D
display and select a view from the list.
Change 2D/3D
display
When should I use this?
In some situations, it is easier to see the map from above. Perhaps if the road
network is complicated or for times when you are walking while using your
TomTom to navigate.

Compass preferences

This button may only be available if all menu options are shown. To show all
menu options, tap Show ALL menu options in the Preferences menu.
Tap this button to configure the compass. The following options are
available:
• None - the compass is not shown.
Compass • One with arrow pointing north - the arrow always points towards north
preferences
• One with arrow showing your heading - the arrow always shows the
• One with arrow pointing to your destination - the arrow always points
and the direction you are moving is shown at the top of the compass.
direction you are moving.
If you select one of these options, you then need to select the features
that are shown in the middle of the arrow:
• Direction - your direction is shown as a compass point, displayed in
the centre of the compass arrow.
• Degrees - your direction is shown as compass degrees, displayed in
the centre of the compass arrow.
• Nothing
towards your destination. The distance to your destination is displayed
in the compass arrow.
47