Table of Contents
Advertisement
network connection and setup
Follow the instructions below if you select <Use the following IP address>:
ex1) If the address (LAN IP) of the IP router is 192.168.1.1
IP address: 192.168.1.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
ex2) If the address (LAN IP) of the IP router is 192.168.0.1
IP address: 192.168.0.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
ex3) If the address (LAN IP) of the IP router is 192.168.xxx.1
IP address: 192.168.xxx.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.xxx.1
M
For the address of the IP router, refer to the product's documentation.
CONNECTING THE CAMERA DIRECTLY TO A DHCP-
BASED XDSL/CABLE MODEM
SNV-3080
Setting the IP Router
This is enabled for a modem using DHCP.
1.
Set the Static or Dynamic IP address. (pages 41~45)
2.
Launch an Internet browser on the local PC connected to the IP Router.
3.
Enter the IP Router's address in the address bar of the browser.
ex) http://192.168.1.1, http://192.168.0.1
or http://192.168.xxx.1
For the DDNS URL address, refer to "To check the DDNS address". (page 48)
38_ network connection and setup
INTERNET
xDSL or
xDSL 또는
Cable 모뎀
Cable Modem
DDNS Server
DDNS 서버
(Data Center, KOREA)
(Data Center, KOREA)
외부 원격 PC
External
Remote PC
Advertisement
Table of Contents
