Panasonic TH-37PX60U Operating Instructions Manual page 8

Accessories/Options
2
Setting-up
Bottom view
Rear side
Pole
3
Stopping the plasma television from falling over
* The plasma TV must be fastened to both the base and the wall.
Accessories for pedestal security
1 Band (2)
Securing to a base
Front
Front
Wood Worktop
Fasten with wood screws in the holes in the
back edge of the wood worktop. If there are
no holes, first drill them in the middle of the
thickness of the wood worktop, and then
fasten the strap with wood screws.
8
* Place pedestal on
Television unit
a horizontal and
level surface.
Hole for installation
pedestal
Pole
Arrow mark
Pedestal
Label
For 37'', 42'', 50'' Plasma television
2 Screw (2)
Nominal diameter
4 mm x 12
D
Lift the television unit above the pedestal,
with the back of the television unit on
the same side as the pedestal Label.
Then align the holes in the television unit
(bottom) with the poles of the pedestal and
lower the television unit into place.
Use the assembly screws
fasten securely.
3 Wood screw (2)
Securing to a wall
Screws on main body
Securing method
(M5 x 30) to
B
4 Clamp (2)
* Remove the screws at
both top corners on
the rear side of the
plasma TV, and attach
the clamps 4 to the
plasma TV using the
removed screws.
* Use strong wire
or chain which is
commercially available
to secure the plasma
television to a solid
area of the wall or a
pillar.