Table 5.25 Format Of Sct Status Response - Fujitsu MHW2160BH Product Manual

Interface

Table 5.25 Format of SCT STATUS Response (1/2)

BYTE
000h
Format Version
001h
002h
SCT Version
003h
004h
SCT Spec
005h
Status Flag
Bit31-1: Reserved
006h
Bit0: Initialized flag (maintained Power-OFF/ON)
007h
0 = When any user LBA is written, this bit is cleared.
008h
009h
1= A WRITE SAME command to all logical blocks has completed
Drive State
00h = Active
01h = not support (Standby)
02h = not support (Sleep)
00Ah
03h = DST executing in background.
04h = SMART Off-line Data collection executing in background.
05h = SCT command executing in background.
06h-FFh = Reserved
00Bh
to Reserved
00Dh
Extended Status Code
00Eh
Status of last SCT command issued.
00Fh
* (See Table 5.26)
010h Action Code
011h Action code of last SCT command issued.
012h Function Code
013h Function code of last SCT command issued.
5-74
This bit is also cleared if the capacity of the drive is changed via
SET MAX (EXT), DCO.
without error.
Contents
C141-E245