Canon Creative Park Paper Aquarium Clown Fish Assembly Instructions

You will need
Scissors, glue, ruler, a used ball-point pen, white string
Explanation of symbols
Mountain fold (Dotted line)
Valley fold (Dashed and dotted line)
Cut line (Solid line)
Cut in line (Red solid line)
Glue tab
Cut out
Assembly tip
Trace along the folds with a ruler and a used
pen (no ink) to get a sharper, easier fold.
Caution: This craft requires the use of glue, scissors, and other tools
which may be dangerous to young children. Please keep them out of
reach of children while you work.
Paper Aquarium : Clown fish
Frame
As for A1, fold each side inwardly
and glue the back of each side together.
A 1
Front
As for A2-A5, fold the upper side inwardly
and glue the back of each side together.
Make two each.
3) Cut out A6-A8 and assemble each part.
A 6
A 8
A 7
[Assembly Instructions]
1) Cut out A1-A5 and 2) Assemble A1-A5.
assemble each part.
A 1
Make four of these.
Back
Front
Back
So that it becomes box-shaped, do
the same for the ends of A1 and A4/A5.
Fold A6 and A8 in half and attach the back
of each side together respectively.
*A8 is the lid (upper portion) of the frame.
When everything is complete, put it on the top.
As for A7, cut along the cut line and fold it
in half after cutting out the designated area.
Then attach the sides together.
A 2 A 4 A 2
A 1 A 1
A 3 A 5 A 3
As shown in the diagram, assemble by attaching
both ends of A1 to the glue tabs of A2-A5.
Attach A5 to the remaining
A3 glue tabs.
A 1
A 5
Likewise, attach A4 to A2.
4) Assemble A6 and A7 to the frame
you've already completed.
Add some glue to the glue tabs and
attach A7 to the upper part of the frame.
Attach A6 to the bottom
with the sand part face up.
A 4
A 1
A 5
A 3
A 7
A 6