Operation - Dometic DM50D Installation And Operating Manual

Operation

➤ Remove the gasket.
➤ Remove the lock cover.
Drilling the holes (fig. b, page 8)
➤ Drill a hole (A 1) with a diameter of 23.6 mm through the decor (only DM50D)
and the door.
➤ Unscrew the twelve screws (B 1) of the decor frame (B 2) (only DM50D).
➤ Remove the decor frame (only DM50D).
Assembling the lock (fig. c, page 9)
➤ Put the new lock cover (A 1) into place.
➤ Put the decor (B 1) into the decor frame.
➤ Screw (B 2) the decor frame (B 3) onto the door.
➤ Install the door lock (C 1).
➤ Install the lock catch (D 1) in the cabinet.
Assembling the drawer (fig. d, page 9)
➤ Push the gasket (1) on the decor frame (2).
➤ Screw the door handle (4) onto the door.
➤ Push the plugs (3) on the screws of the door handle (4).
➤ Push the drawer into the cabinet.
7 Operation
A
NOTICE! Damage hazard
The lamp can only be replaced by the manufacturer, service agent or
similarly qualified person to avoid hazard.
7.1 Energy saving tips
• Do not open the cooling device more often than necessary.
• Do not leave the cooler unit open for longer than necessary.
20
DM50
EN