Table of Contents
Advertisement
EN 20
4.
L12M3.1L LA
4.4
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
h For sets in the 7000- and 8000 range, it is of the utmost
importance to keep cables out of the swivel range when re-
assembling the set, to avoid future cable cut.
Refer to
Figure 4-10
to
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position.
•
Pay special attention not to damage the EMC foams in the
set. Ensure that EMC foams are mounted correctly.
2013-Jun-21
Mechanical Instructions
Figure 4-18 Back cover Ambilight wiring
Figure
4-13.
19510_107_130424.eps
130424
Hide quick links:
Advertisement
Table of Contents
