Sound And Volume; Cds And Dvds - eMachines M2105 User Manual

Emachines m2105: user guide
Table of Contents

Advertisement

sound and volume

Q
There is no sound coming from my notebook. What's wrong?
A
The volume is muted or is turned down too low.
Do the following:
Check the volume icon in the icon tray to see if it is muted.
— Press both the volume up and the volume down quick action
buttons at the same time. (This is a quick way to mute and unmute
the sound.)
— Click the volume icon and uncheck Mute.
Double-click the volume icon and verify that the Mute boxes are not
checked and that the volume sliders are not all the way down.
Press the volume up quick action button to increase the sound level.

CDs and DVDs

Q
My CD/DVD drive doesn't read my disc or takes a long time to start up.
What's wrong?
A
Be aware that CDs and DVDs take approximately 30 seconds to start,
because the drive has to determine the type of disc.
Make sure that the disc is inserted properly.
Remove the disc and clean it. Then insert it and try to play it again.
Q
I cannot eject my CD or DVD. What should I do?
A
Your notebook must be turned on to remove CDs and DVDs. If you do not
want to turn on your notebook, manually eject the disk by inserting an
opened paper clip into the manual eject hole. See
chapter 3 for more information.
"using CDs and
80
getting started
DVDs" in

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M6410M2350M2352M2356M6805M6807 ... Show all

Table of Contents