eMachines M2350 Network Manual page 29

Emachines m2350: network guide
Hide thumbs Also See for M2350:
Table of Contents

Advertisement

Your wireless network is listed as a preferred network, but it has an
"x" on it.
An x means your preferred network is not currently available or you
are not currently in range to connect.
Internet Explorer is unable to access the Internet.
Reset the power on your cable or DSL modem and your access point.
This reestablishes communication between your Internet service
provider and your modem and between your modem and your access
point.
If you previously accessed the Internet through a dial-up modem,
Internet Explorer may not be set up to access the Internet through
a network.
To set up Internet Explorer to access the Internet through a
network:
1
Make sure that the access point is turned on and configured as
instructed by your cable or DSL provider.
2
Click
Start
Internet Properties dialog box opens.
Troubleshooting your wireless network
, right-click
Internet
www.eMachines.com
, then click
Internet Properties
. The
27

Advertisement

Table of Contents
loading

Table of Contents