Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Cool Energy Manuals
  4. Heater
  5. R500/80-200JT-W
  6. Manual

Cool Energy R500/80-200JT-W Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
MANUAL INSTRUCTIONS
HEATER
PLEASE READ AND SAVE THESE INSTRUCTIONS

Advertisement

loading

Summary of Contents for Cool Energy R500/80-200JT-W

  • Page 1 MANUAL INSTRUCTIONS HEATER PLEASE READ AND SAVE THESE INSTRUCTIONS...

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS:  This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Page 3 I / ELECTRICAL CONNECTION  Your heater must only be installed in a fixed position in accordance with national installation rules (for France, NFC 15100)  INDOORS USE ONLY  This installation must be done by a qualified electrician to avoid any danger. ...
  • Page 4 Caution: Before switching on the appliance make sure that the radiator is correctly fixed to the wall.
  • Page 6 II / Technical specifications Power supply: 230V~ 50Hz Power: 1000W, 1500W, 2000W, Radiator’s technical characteristics : Under Wire control modes, there are 6 available modes: 1、COMFORT MODE, 2、COMFORT-1 MODE,3、 COMFORT-2 MODE ,4、ECONOMIC MODE, 5、ANTIFREEZE MODE, 6、POWER OFF MODE. - Minimum temperature setting value: +/- 0.5º C - Temperature range setting：...
  • Page 7 temperature and time. - used to set temperature and time When using, confirm that the mechanical switch is in the open state first, short press ON / OFF button to turn on or turn off the radiator.After pressing the button,the radiator enters the original shutdown mode.
  • Page 8 FUNCTION 2.1 COMFORT MODE This is the COMORT MODE. The radiator runs until the room temperature reaches the set temperature set before. The setting temperature is 19 º C . When the room is occupied, the radiator is in COMORT MODE . 2.2 ECONOMIC MODE This is ECONOMIC MODE, compare with COMORT MODE, temperature setting should not be higher than COMORT MODE.

  • Page 9: Timing Mode

    3. Short press mode 4. Short press mode button, till button, week icon flicker( “1”) mintute icon(“00”)ficker, Press+and-button Press+ key and select –key week.1=Mond mintue(“00”)If ay,2=Tuesday, there operation in 30 Wednesday, seconds, 4=Thursday,5 automatically =Friday,6=Sat jumps urday,7=Sund week settings. Press mode button jump...

  • Page 10: Economic Mode

    Illustration shows below: 1、Press the mode 2、 Then press the button mode button. seconds until the time flicker ("09"). Flicker ("30"). 3、Press mode button. 4、Press mode button. Flicker("1") then press + key to set to Tuesday. 5、Press the mode button for 5 seconds.
  • Page 11 9、Illustration : Icon Description The icon is off, indicate no heating. ECONOMIC MODE works Current time Tuesday TIMING MODE Under ECONOMIC MODE, one second to open, two seconds to close, a solid bar flicker. 2.5.3、 P1-P7 Program COMFORT COMFORT MODE 19:00 to MODE 6:00to22:00 （...

  • Page 12: Sensor Mode

    SENSOR MODE When radiator switches to microwave induction mode, if no human or moving objects are detected, the radiator will automatically shift to a more energy-efficient mode. If detected human or moving objects , it automatically jumps to the SENSOR MODE interface. If you want to use microwave body induction function, you need to open microwave induction system inside the radiator.
  • Page 13  FONCTION WIFI (Seulement pour les modè les avec fonction wifi) APP name： Radistar in Apples store or Radistar in Google play Please download App from Apple store or Google Paly firstly. Open Wifi Function： 1、Open radiator WIFI Function, WIFI icon flickers. ‘...
  • Page 14 4、Set up current 3、Add device WIFI and password. 5、When radiator isin standby state, 6、Long press icon flickering on LCD. 7、Connect to 8、Press the confirm WIFI, time starts key to set up the counting down current WIFI and from 60 59 password.
  • Page 15 9、APP 10、APP connect connecting successfuly. 12、Return to 11、Radiator standby state,LCD connect show time and successfuly. Operate instruction for APP homepage fuction: 2、Enter to APP 1、Press homepage key.
  • Page 16 2.1、Illustration : Icon Description Trademark Select the device name by slide left or right. COMFORT MODE icon, Press COMFORT MODE works, current setting temperature is 30℃. The heating icon is on, indicate heating. Current radiator ambient temperature is ℃. 14.0 Temperature set up : check temperature COMFORT/ ECONOMIC/ ANTIFREEZE MODE, modify...
  • Page 17 Temperature setting 1.1、 Press+ /―key to 1、Temperature settings, press the set temperature for temperature COMFORT and setting icon,then ECONOMIC switch to the MODE,after set up, temperature press conform key, setting interface. exit to home page. 2 Timer set up and modify 2、Switch to timed mode interface.
  • Page 18 5、Modify P program. Select the P program you want to change. Draw a 5.1、Select timing circle outside the mode time by hand. The After loosening the inner display hand, the middle changes from the time will disappear. selected time to COMFORT/ the stop time.
  • Page 19 7.2、 a、 To recover controling radiator APP by Timing mode, can 7.2、b、Then press be achieved by the timing icon, switching mode appear timed page, on the home page. press` save button, can also achieve Picture shows： APP to controlthe Switch to Sense radiator.
  • Page 20 2.4、Delete divice. a.Confirm to delete 2.3、Turn back to device. devide list. b.Cancle to delete device. 3.1 Exit logon. a. Original login 3、 Press logout account saved. key a.Cancel b. The password b.Confirm needs to be re entered Power down memory function： If power failure occurs, the last work setting will be saved, and it will return to the settings before power failure when the power is on again, no need to reset.

  • Page 21: Maintenance

    Problem Code Ambient temperature sensor is disconnected or the ambient Err 1 temperature is too low Ambient temperature sensor is short-circuited or the ambient Err 2 temperature is too high Once connected, the app does not work properly IV / Maintenance : TURN OFF THE UNIT BEFORE ANY MAINTENANCE.
  • Page 22 Model identifier(s): R500/80-200JT-W / AG80JT Item Symbol Value unit Item unit Heat output Type of heat input, for electric storage local space heaters only (select one) Nominal heat output manual heat charge control, with [no] integrated thermostat Minimum heat manual heat charge control with...
  • Page 23 Model identifier(s): R500/80-150JT-W / AG80JTW15 Item Symbol Value unit Item unit Heat output Type of heat input, for electric storage local space heaters only (select one) Nominal heat output manual heat charge control, with [no] integrated thermostat Minimum heat manual heat charge control with [no] output (indicative) room and/or outdoor temperature...
  • Page 24 Model identifier(s): R500/80-100JT-W / AG80JTW10 Item Symbol Value unit Item unit Heat output Type of heat input, for electric storage local space heaters only (select one) Nominal heat output manual heat charge control, with [no] integrated thermostat Minimum heat manual heat charge control with [no] output (indicative) room and/or outdoor temperature...
  • Page 26 This symbol indicates that this product contributes to the protection of the environment by applying the WEEE Directive 2012/19/EU. Disposal of used electrical and electronic equipment with household waste or in the environment is prohibited. They are asked to take them to one of the selective collection centers planned by the municipal administration to ensure their recycling.

This manual is also suitable for:

Ag80jt-w20