Table of Contents
Advertisement
Audio/Video Connection to a Screen with S-Video and Stereo
Audio Inputs
If your screen features an S-VIDEO (Hosiden) input, you can use this video connection type as an alternative.
The S-Video connector can be recognized easily by its 4 pins. When using S-Video, the luminance and
chrominance signals are split resulting in higher picture quality than for Composite video. For the audio
connection, use the red and white stereo audio inputs of your TV.
white
Stereo
Cinch cable
to TV screen's stereo
input
Have the following cable ready:
1. S-Video cable (not included in the package)
2. Audio/video cable – red and white connectors
(supplied)
3. Power cord (please note that your Silvercrest
DVD player has a fixed-installed power cord)
Warning: Connect the power cord of your DVD
player only after you have finished connecting all
video and audio cables.
16
red
SVHS
cable
to TV screen's S-Video
input
1. Power your screen off and connect the DVD
player's S-Video Out with the S-Video In
connector of your screen. Use a special S-Video
cable that can be purchased at any retail shop.
2. If you want to output the sound via your screen,
connect the DVD player's stereo connectors to
the corresponding inputs of your TV. Use the red
and white connectors of an audio/video cable.
3. As your Silvercrest DVD player has a fixed
power cord, you only need to plug the other end
into a wall outlet.
4. First turn on your TV then turn on the DVD
player.
5. Select the S-Video input on your TV.
Note: For further information, please check the
instruction manual offered by your screen. On the
TV screen you'll see the DVD player's start
screen.
6. If no picture is displayed, press the V-Mode
button (button 37 on the fold-out cover page) of
the remote control to enable the SVHS Output of
your Silvercrest DVD player and press the
button as many times as necessary to display the
picture.
Advertisement
Table of Contents
