Electrical Supply Connection - Rangemaster RDXD21 User Manual & Installation & Service Instructions

Electrical Supply Connection

Connect the appliance to the electrical supply (220-240 V ~
50 Hz) with the plug and lead, which are fitted.
Connections to the mains supply should be in accordance
with local regulations.
DO NOT use plug adapter.
n
The appliance must be plugged into an earthed
n
socket.
Always make sure that the plug is accessible after
n
the appliance has been positioned.
If the electrical cable is damaged or worn, turn off the
refrigerator and consult an authorised agent for replacement.
The appliance is supplied with a standard 13 amp
n
3-pin mains plug fitted with a 13-amp fuse. Should
the fuse require replacement, it must be replaced
with a fuse rated at 13 amp and approved to BS1362.
If the mains plug which is fitted is unsuitable for
n
the socket outlet in your home or is removed for
any other reason, please contact an approved
electrician.
The mains lead of this appliance has been fitted with a BS
1363A 13A fused plug. To change a fuse in this type of plug,
follow the steps below:
1. Remove the fuse cover and fuse.
2.
Fit replacement 13A fuse, ASTA approved to BS 1362
type, into the fuse cover.
3. Replace fuse cover.
27
Fig. 7.3