Summary of Contents for Swann CURING LIGHT
- Page 1 Instruction Manual Please read this manual before operating RF-SWA-M001-1.1 20210506...
-
Page 2: Safety Precautions
Lithium battery are likely to damage the circuit. 6. Please recharge the battery at least 4 hours before first time usage. It’s forbidden to connect the charger to the base for long time while not charging and it’s not allowed to use the curing light while charging. -
Page 3: Product Introduction
1 Product introduction The curing light manufactured by Guilin Refine Medical Instrument Co., Ltd. uses the principle of light radiation to irradiate photosensitive resin in order to quickly cure it. This product is intended for use in hospitals and dental clinics and it’s used for prevention and treatment of dental complications of adults or children. -
Page 4: Operation
4 Installation and demounting Insert the large end of the light guide (front connector) into the mounting hole at the upper end of the curing light (please insert it into the bottom in a rotating way, do not be obliquely). -
Page 5: Troubleshooting
Normal operation. ● Except for the cables sold by the manufacturer of the curing light as spare parts of internal components, the use of accessories and cables other than those specified may cause the curing light Increase in emission or decrease in immunity. - Page 6 Guidance and manufacturer’s declaration - electromagnetic emissions The models Curing Light are intended for use in the electromagnetic environment specified below. The customer or the user of the models Curing Light should assure that it is used in such an environment. Emissions test...
-
Page 7: Environmental Protection
To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the models Curing Light are used exceeds the applicable RF compliance level above, the model Curing Light should be observed to verify normal operation. -
Page 8: After Sales Service
11. After sales service 11.1 If this equipment cannot work normally due to quality problems from the date of sale, please show the warranty card and our company will be responsible for the maintenance. Please refer to the product warranty card for the warranty period and warranty scope.