Using The Thinkpad Setup Program; Configuring Thinkpad Setup; Changing The Startup Sequence - Lenovo ThinkPad T470s User Manual

System Update or Lenovo Companion then displays a list of update packages and categorizes each update
as critical, recommended, or optional to help you understand the importance. You have complete control of
which updates to download and install. After you select the update packages you want, System Update or
Lenovo Companion automatically downloads and installs the updates.
System Update or Lenovo Companion is preinstalled on your computer and is ready to run. The only
prerequisite is an active Internet connection. You can start the program manually, or you can use the
schedule feature to enable the program to search for updates automatically at specified intervals. You also
can predefine scheduled updates to search by the following severity so the list you choose from contains
only those update types that you need:
• Critical updates (Windows 7 and Windows 10)
• Critical and recommended updates (Windows 7)
For more information about how to use System Update or Lenovo Companion, see the help system
of the program.

Using the ThinkPad Setup program

The ThinkPad Setup program enables you to select the preferred settings for your computer through
configuring the BIOS.

Configuring ThinkPad Setup

The ThinkPad Setup program menu lists various items about system configuration.
Attention: The default configurations are already optimized for you. Improper change of the configurations
might cause unexpected results.
To configure ThinkPad Setup, do the following:
1. Restart the computer. When the logo screen is displayed, press F1. The ThinkPad Setup program starts.
Note: If you are required to enter the supervisor password, enter the correct password. You also can
press Enter to skip the password prompt and start the ThinkPad Setup program. If you do not enter the
password, you cannot change the configurations that are protected by the supervisor password.
2. Use the arrow keys to select a tab; or use the arrow keys to locate an item and press Enter to select
it. Then the supported submenu is displayed.
3. Default values are in boldface. Set the value of an item by doing one of the following:
• Press F6 to change to a higher value.
• Press F5 to change to a lower value.
4. Press the Esc key to exit the submenu and return to the parent menu. Then use the same method
mentioned above to change other configurations.
5. When you complete the configuration, press F10 to save and exit. You also can select the Restart tab in
the ThinkPad Setup menu, and restart your computer with one of the provided options.
You can press F9 to restore to the default settings.

Changing the startup sequence

In some cases, you might have to change the startup sequence so that the computer starts from a desired
device when powered on. Read this topic to learn how to change the computer startup sequence.
Attention:
68
T470s User Guide