Download Print this page
EverFocus ED200/N2B Operation Instructions Manual
EverFocus ED200/N2B Operation Instructions Manual

EverFocus ED200/N2B Operation Instructions Manual

Color dome camera

Advertisement

Quick Links

Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.
PRECAUTIONS
1.
Do not have camera immersed in water.
2.
Do not disassemble it or place it on an unstable base.
3.
Do not touch the surface of CCD sensor by hand directly.
4.
Never face the camera toward the sun.
5.
Use proper power source otherwise the camera will not function correctly.
6.
Use the camera at temperatures within 0℃ ~ 50℃/32℉~122℉ and humidity between 20%~
80%. The input power sources is 12VDC only.
EVERFOCUS
Color Dome Camera

Operation Instructions

ED200
Model No.

Advertisement

loading

Summary of Contents for EverFocus ED200/N2B

  • Page 1: Operation Instructions

    Never face the camera toward the sun. Use proper power source otherwise the camera will not function correctly. Use the camera at temperatures within 0℃ ~ 50℃/32℉~122℉ and humidity between 20%~ 80%. The input power sources is 12VDC only. EVERFOCUS Color Dome Camera Operation Instructions ED200...
  • Page 2: Standard Accessories

    PREFACE The ED200 Series Camera is a compact, full functioned CCD Camera. Their stylish appearance can be applied as per installer's ideal locations. These dome cameras can be mounted either on the ceiling or on the wall easily. ED200 uses high sensitive 1/3" color interline transfer CCD sensor with DSP.
  • Page 3: Installation

    LENS AVAILABLE * Standard board lens f=3.6 mm, F=2.0 mm. * Other available lens : 2 Lens f=2.5 mm, F=2.0 mm INSTALLATION 1. Remove the plastic dome cover. 2. Loosen the two screws of the supporting bracket to remove the camera body. 3.
  • Page 4 5. Connect the BNC connector of the camera to a color monitor, or other video device through a 75 ohm type coaxial cable with BNC female connector at cable extension. 6. Connect the DC +12V regulated power source of the camera (DC Jack) to the DC 12V Power-in jack with 2 mm, center+, outer- plug.
  • Page 5: Specifications

    SPECIFICATIONS Pickup Device Video Format Scanning System Picture Elements Horizontal Resolution Sensitivity S/N Ratio Electronic Shutter f=2.5mm; f=3.6mm; f=4.3mm; f=6.0mm; f=8.0mm; f=12.0mm; Lens Type Back Light Comp. Auto Gain Control Auto White Balance Gamma Correction Video Output Sync. Mode Power Source Power Consumption Dimensions Weight...
  • Page 6 415 Oser Avenue Unit S Hauppauge, NY 11788 TEL: 631-436-5070 FAX: 631-436-5027 www.everfocus.com Your EverFocus product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste.

This manual is also suitable for:

Ed200/n4bEd200/n3bEd200/n8bEd200