Related Manuals for King Industrial KAC-1200
Summary of Contents for King Industrial KAC-1200
- Page 1 HIGH-OUTPUT 3 SPEED AIR CLEANER WITH REMOTE CONTROL MODEL: KAC-1200 INSTRUCTION MANUAL COPYRIGHT © 2020 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
-
Page 2: Warranty Information
WARRANTY INFORMATION 2-YEAR KING CANADA TOOLS LIMITED WARRANTY OFFERS A 2-YEAR LIMITED WARRANTY FOR THIS 3 SPEED AIR CLEANER FOR COMMERCIAL USE. PROOF OF PURCHASE Please keep your dated proof of purchase for warranty and servicing purposes. REPLACEMENT PARTS Replacement parts for this product are available at our authorized King Canada service centers across Canada. Please use the 10 digit part numbers listed in this manual for all part orders where applicable. -
Page 3: General Safety Instructions For Power Tools
GENERAL SAFETY INSTRUCTIONS FOR POWER TOOLS 1. KNOW YOUR TOOL. Read and understand the owners 12. ALWAYS WEAR SAFETY GLASSES. Always wear safety manual and labels affixed to the tool. Learn its application and glasses (ANSI Z87.1). Everyday eyeglasses only have impact limitations as well as its specific potential hazards. -
Page 4: Electrical Information
ELECTRICAL INFORMATION WARNING! ALL ADJUSTMENTS OR REPAIRS MUST BE DONE WITH THE AIR CLEANER DISCONNECTED FROM THE POWER SOURCE. FAILURE TO COMPLY MAY RESULT IN SERIOUS INJURY! GENERAL INFORMATION- 120V single phase operation PROPERLY This air cleaner comes with a 120V single phase motor. GROUNDED OUTLET CURRENT CARRYING PRONGS WARNING: YOUR AIR CLEANER MUST BE CONNECTED TO A... -
Page 5: Specifications
GETTING TO KNOW YOUR AIR CLEANER 1. Hanging eye bolts (4) 2. 5 Micron outer filter 3. Filter retaining clips (2) 4. Remote control 5. Ceiling mounting brackets 6. Adhesive rubber feet (4) 7. 1 Micron inner filter 8. Timer setting LED indicators 9. -
Page 6: Setting Up The Air Cleaner
SETTING UP THE AIR CLEANER UNPACKING The Air Cleaner is shipped complete in one carton. Carefully unpack the Air Cleaner and all loose items from the carton. WARNING: DO NOT LIFT THE AIR CLEANER BY ITS POWER CORD. FIGURE 4 WARNING: STYROFOAM BLOCKS PLACED AROUND THE MOTOR AND IMPELLOR MUST BE REMOVED BEFORE OPERATING AIR CLEANER. -
Page 7: Operation
OPERATION OPERATION WARNING! NEVER OPERATE THE AIR CLEANER WITHOUT THE INNER AND OUTER FILTERS PROPERLY INSTALLED IN THE CABINET. Operating the control panel The control panel (A) Fig.7 allows you to manually turn the air cleaner On or Off and set the motor/fan speed. Fuse: This Air Cleaner is protected by a fuse (B) Fig.7, in the event of an overload, the fuse will burn out and the motor will turn off.