General Specification - New Holland H9870 Service Manual

General specification

The specifications on the following pages are given for your information and guidance. Our policy is one of continuous
improvement. The right to change specifications or equipment at any time without notice is reserved. All data in this
manual is subject to production variations. Dimensions and weights are approximate.
General dimensions
Overall length
Overall width
Loader raised, stabilizers off
Loader raised, stabilizers at widest
Loader down, stabilizers at widest
Overall height
Top of stabilizers
Clearance needed to unload
Ground clearance
Track width (center to center)
Wheel base
Weight
Total with fuel, oil, and coolant
Approximate loaded weight
Weight box (optional)
Maximum allowable Gross Vehicle
Weight (GVW)
Engine
Maximum power at rated speed
Rated speed
Peak torque
Low idle speed
High idle speed
Aspiration
Number of cylinders
Bore
Stroke
Displacement
Compression ratio
Firing order
Valve clearance
position
position
14 inx 18 in: 513 cm (202 in)
Front axle
Transmission
Front
Rear
7498 kg (16,530 lb)
14,071 kg (31,020 lb)
48 kg (106 lb) empty, 275 kg (600 lb)
14,515 kg (32,000 lb)
INTRODUCTION
H9870
953 cm (375 in)
302 cm (119 in)
345 cm (136 in)
417 cm (164 in)
447 cm (176 in)
429 cm (169 in)
24 cm (9-5/8 in)
25 cm (10 in)
206 cm (80.25 in)
183 cm (72 in)
447 cm (176 in)
H9870
full
765 N·m (564 lb ft) at 1300 RPM
Crankshaft: 2550 +/- 25 RPM
Intake 0.25 +/- 0.05 mm (0.01 +/- 0.002 in)
Exhaust
0.50 +/- 0.05 mm (0.02 +/- 0.002 in)
47918070 02/12/2015
23
H9880
953 cm (375 in)
285 cm (112 in)
322 cm (127 in)
371 cm (146 in)
447 cm (176 in)
429 cm (169 in)
16 inx 18 in: 533 cm (210 in)
24 cm (9-5/8 in)
25 cm (10 in)
206 cm (80.25 in)
183 cm (72 in)
447 cm (176 in)
H9880
7275 kg (16,040 lb)
12,297 kg (27,110 lb)
48 kg (106 lb) empty, 275 kg (600 lb)
full
14,515 kg (32,000 lb)
129 kW (175 Hp)
2300 RPM
Crankshaft: 800 +/- 50 RPM
Turbocharged & after-cooled
Six
104 mm (4.1 in)
132 mm (5.2 in)
6.7 l (408.9 in³)
17.5:1
1-5-3-6-2-4