Pioneer DEH-4300UB/XNUC Service Manual page 20

1
QQ
3 7 63 1515 0
USB storage device/iPod
Message Cause
A
NO DEVICE When plug and
play is off, no
USB storage de-
vice or iPod is
connected.
FRMT READ Sometimes there
is a delay be-
tween the start of
playback and
when you start to
hear any sound.
NO AUDIO There are no
songs.
B
The connected
USB storage de-
vice has security
enabled
SKIPPED The connected
USB storage de-
vice contains
WMA files em-
bedded with
Windows Med-
ia™ DRM 9/10
PROTECT All the files in the
USB storage de-
C
vice are em-
bedded with
Windows Media
DRM 9/10
N/A USB The connected
TE USB storage de-
L 13942296513
vice is not sup-
ported by this
unit.
D
E
www
F
20
1
http://www.xiaoyu163.com
2
Action
• Turn the plug
and play on.
• Connect a com-
patible USB sto-
rage device/iPod.
Wait until the mes-
sage disappears
and you hear
sound.
Transfer the audio
files to the USB
storage device and
connect.
Follow the USB
storage device in-
structions to dis-
able the security.
Play an audio file
not embedded with
Windows Media
DRM 9/10.
Transfer audio files
not embedded with
Windows Media
DRM 9/10 to the
USB storage de-
vice and connect.
• Connect a USB
Mass Storage
Class compliant
device.
• Disconnect your
device and replace
it with a compati-
ble USB storage
device.
x ao
y
. i
DEH-4300UB/XNUC
2
http://www.xiaoyu163.com
3
8
Message Cause Action
CHECK USB The USB connec- Check that the
tor or USB cable USB connector or
has short- USB cable is not
circuited. caught in some-
thing or damaged.
The connected Disconnect the
USB storage de- USB storage de-
vice consumes vice and do not
more than 500 use it. Turn the
mA (maximum ignition switch to
allowable cur- OFF, then to ACC
rent). or ON and then
connect only com-
pliant USB storage
devices.
The iPod oper- Make sure the con-
ates correctly but nection cable for
does not charge the iPod has not
shorted out (e.g.,
not caught in
metal objects).
After checking,
turn the ignition
switch OFF and
back ON, or dis-
connect the iPod
and reconnect.
• Perform one of
ERROR-19 Communication
failed. the following op-
erations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
Q Q USB storage de-
3 6 7 1 3
vice.
–Change to a dif-
ferent source.
Then, return to the
USB source.
• Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, recon-
nect the iPod and
reset it.
iPod failure Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, recon-
nect the iPod and
reset it.
ERROR-23 USB storage de- USB storage de-
vice is not for- vice should be for-
matted with matted with FAT12,
FAT12, FAT16 or FAT16 or FAT32.
FAT32
ERROR-16 The iPod firm- Update the iPod
version.
ware versions are
old.
iPod failure Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, recon-
nect the iPod and
reset it.
u163
STOP There are no Select a list that
songs in the cur- contains songs.
.
rent list.
NOT FOUND No related songs Transfer songs to
the iPod.
3
4
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
4
9 9
2 8 9 9