Kenwood NEXEDGE NX-230EX Instruction Manual page 7

Vhf digital transceiver/ uhf digital transceiver
Hide thumbs Also See for NEXEDGE NX-230EX:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Turn the transceiver power off in the following locations:
Near blasting sites.
In aircrafts. (Any use of the transceiver must follow the instructions
and regulations provided by the airline crew.)
Where restrictions or warnings are posted regarding the use of
radio devices, including but not limited to medical facilities.
Near persons using pacemakers.
Do not disassemble or modify the transceiver for any reason.
Do not place the transceiver on or near airbag equipment while the
vehicle is running. When the airbag infl ates, the transceiver may be
ejected and strike the driver or passengers.
Do not transmit while touching the antenna terminal or if any
metallic parts are exposed from the antenna covering. Transmitting
at such a time may result in a high-frequency burn.
If an abnormal odor or smoke is detected coming from the
transceiver, switch the transceiver power off immediately, remove
the battery pack from the transceiver, and contact your KENWOOD
dealer.
Use of the transceiver while you are driving may be against traffi c
laws. Please check and observe the vehicle regulations in your
area.
Do not expose the transceiver to extremely hot or cold conditions.
Do not carry the battery pack with metal objects, as they may short
the battery terminals.
Danger of explosion if the battery is incorrectly replaced; replace
only with the same type.
iii

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nexedge nx-330ex

Table of Contents