Table of Contents
Advertisement
Available languages
Available languages
To connect a ventilation hose;
1.
Connect the air outlet hose to the
hose spacer piece by turning it
counterclockwise.
2.
Make the hose passages as shown
below.
C
NOTE
•
Exhaust of humid air from the dryer into
the room should be considered. It may
damage the walls and furniture in the
room.
•
The ventilation hose can be routed
outdoors via a window or it can be
connected to the air outlet in the
bathroom.
•
Air outlet hose must be routed directly
to the outdoors. There must be a limited
number of elbows as not to hinder
ventilation.
•
To prevent water accumulation in the
hose, make sure that it is not folded on
the floor.
B
DANGER!
•
The ventilation hose should not be
connected to the chimney of a stove or a
fireplace.
•
Do not operate your product at the same
time with heaters such as a coal or gas
stove. Airflow may cause the chimney to
flare up.
Dryer / User Manual
3.3 Adjusting feet
In order to ensure that your product operates
more silently and vibration-free, it must stand
level and balanced on its feet. Front feet of your
product can be adjusted. Balance the machine
by adjusting the feet.
1. Loosen the feet by hand.
2. Adjust the feet until the product stands level
and firmly on the floor.
C
NOTE
•
Do not use any tools to loosen the
adjustable feet, otherwise, they can be
damaged.
•
Never remove the adjustable feet from
their housings.
•
You may consider using 2 plastic
pieces from an Authorized Service
with 2951620100 part number. These
parts prevent your machine from
slipping when the machine is located
on wet and slippery surfaces. You may
assemble mentioned parts to the front
adjustable feet by fitting and pressing
them to snap into ground of feet.
3.4 Transportation of the machine
1.
Unplug the machine from the mains.
2.
Remove the water drain (if any) and
chimney connections.
3.
Drain water remaining in the machine
completely before transportation.
3.5 Changing the illumination lamp
In case an illumination lamp is used in your
laundry dryer.To change the Bulb/LED used
for illumination of your tumble dryer, call your
Authorized Service.The lamp(s) used in this
appliance is not suitable for household room
illumination. The intended purpose of this
lamp is to assist the user to place laundry in
the tumble dryer in a comfortable way. The
lamps used in this appliance have to withstand
extreme physical conditions such as vibrations
and temperatures above 50 °C
29
Advertisement
Table of Contents
