Turning On The Power - Dukane CPX10WN User Manual

Turning on the power

Make sure that the power cord is fi rmly and correctly connected to the
1.
projector and the outlet.
2. Make sure that the POWER indicator is
steady orange. Then remove the lens
cover.
3. Press the STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up and the
POWER indicator will begin blinking in
green. When the power is completely on, the
indicator will stop blinking and light in steady
green.
WARNING ►A strong light is emitted when the projector's power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector's openings.
NOTE • Please power on the projector prior to the connected devices.
• The projector has the DIRECT POWER ON function, which can make the
projector automatically turn on. For more information, please see User's
Manual - Operating Guide.
STANDBY/ON button
POWER indicator
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT AUTO SEARCH
MAGNIFY FREEZE PAGE
UP
ON
OFF DOWN
MY BUTTON
KEYSTONE
POSITION
ENTER
ESC
BLANK
VOLUME
MUTE
MENU
RESET
9