Setting Up For Ibm Aix 3.2.5 Or Later And 4.1.3 Or Later - Epson 802.11g Reference Manual

Setting up for IBM AIX 3.2.5 or later and 4.1.3 or
later
In the following steps, substitute the name that the device will be
known by for HOSTNAME, and the name by which you want the
device to be known for Rprinter.
1. Add the IP address and printer host name to the /etc/hosts
file.
For example:
22.33.44.55 HOSTNAME
2. Run smit.
For example:
smit printer
3. Set the printer name (for example: Rprinter) in:
"Manage Remote Printer"
"Client Services"
"Remote Printer Queues"
"NAME of queue to add".
Set the host name (for example: HOSTNAME) in:
"DESTINATION HOST for remote jobs".
Set the port name (for example: aux) in:
"Name of QUEUE on remote printer".
4. To print, use the lpr command.
For example:
lpr -PRPrinter Print-File-Name
251