Troubleshooting - HoMedics TOTALCLEAN Instruction Manual

TROUBLESHOOTING

PROBLEM
Unit will not operate
Reduced airflow
Reduced odour removal
Excessive noise
Replace filter light remains lit
after filter replacement
Display lights are off
POSSIBLE CAUSE
• Unit is not plugged in
• Power button not pressed
• No power to unit
• HEPA-type filter is not installed correctly
• Grille cover is not installed correctly
• The back grille may be blocked
• Pre-filter needs vacuuming
• The HEPA-type filter needs to be replaced
• The HEPA-type filter needs to be replaced
• The unit is not level
• The replace filter indicator needs to be
reset
• Nightlight setting
GB
I 7
SOLUTION
• Plug unit in
• Press the power button to turn the power on
• Check fuses, try a different outlet
• Reinstall the HEPA-type filter
• Reinstall the grille cover
• Check to make sure nothing is blocking the back
grille and air outlet
• Vacuum the pre-filter with the brush
attachment of your vacuum cleaner
• Replace the HEPA-type filter
• Replace the HEPA-type filter
• Place the unit on a flat, level surface
• Press and hold the ioniser button for 3 seconds
until the replace filter light turns off
• Press the nightlight button until the desired
lights are on/off