Inserting And Removing A Memory Card - Epson P-1000 User Manual

Inserting and Removing a Memory
Card
To insert a memory card, make sure it is facing up, and slide
it in until it is securely seated in the slot.
Make sure the
card is face up
Note:
The eject button may not pop out when you insert the card.
If you are using a CompactFlash adapter, put the card into
the adapter and insert the adapter into the slot.
Caution:
Avoid using or storing the card in direct sunlight, or in places
that are extremely hot, humid, or dusty.
When you are ready to remove a memory card, make sure
the light is off. Then push the eject button and
ACCESS
pull out the card. If the button is not sticking out, press it
once to pop it out, and then press it again to eject the card.
Caution:
Never remove a memory card while the ACCESS light is on; this
can damage or erase data on the card or HDD.
Note:
If you are using a memory card in a CompactFlash adapter,
remove the adapter from the P-1000; do not remove only the
memory card.
Getting Started 18