Home Connect; Setting Up Home Connect; Home Connect App - Bosch B30IR900SP Instruction Manual

en-us Home Connect
T his appliance is Wi-Fi-capable and can be
H o m e C o n n e c t
controlled remotely using a mobile device.
The appliance is not connected to a home
network.
The availability of the Home Connect function
depends on the availability of Home Connect
services in your country. Home Connect services
are not available in every country. You can find
more information on www.home-connect.com.
Wait at least 2 minutes after switching on the
appliance before setting up Home Connect. Only
then is internal appliance initialization complete.
Take note of the Home Connect supplementary
sheet, which is supplied with the appliance or is
available for download at www.bosch-home.com
together with the instructions. Enter the E-number
of your appliance in the search field.
You can connect your appliance to the home WLAN
network (Wi-Fi) in 3 basic steps.
Install the app.
Connect your refrigerator to the home WLAN
network (Wi-Fi).
Connect the refrigerator to the Home Connect
app.
The first time you open the menu, you will be
automatically guided through initial setup. Follow the
instructions on the control panel. For further
information, please also see the following chapters.
The following submenus can be found in the Home
Connect menu:
Switching Wi-Fi on and off
Connect to app
Software update
Deleting network settings
12
Install the Home Connect app on your mobile
device.
Open the Home Connect menu on your
refrigerator.
Open the app on your mobile device.
Log in or register with the app if access is not yet
available.
Check the router of your home network to see if a
WPS function is available for automatic
connection.
If this function is available, start automatic
network connection and follow the instructions on
the control panel.
Start manual network connection if this function is
not available, if you're not sure whether the
function is available, or if automatic network
connection failed.
The refrigerator temporarily generates its own
network for connecting the mobile device.
Start manual network connection in the app of
your mobile device.
As soon as the refrigerator is connected to the
mobile device, a connection between the refrigerator
and your home network (WLAN) is established.
Place the router closer to the refrigerator.
Check that screening walls do not interfere with
the connection.
Install a repeater to make the signal stronger.
Install the Home Connect app on your mobile
device and log in or register.
Open the Home Connect menu on your
refrigerator.
Tap menu item Connect to app.
Confirm the prompt to display the refrigerator in
the app.
Open the app and wait until the refrigerator is
displayed.
Press Add to confirm the connection between the
app and the refrigerator.