Related Manuals for Panasonic SR-8585-E
Summary of Contents for Panasonic SR-8585-E
- Page 1 DVD-ROM DRIVE UNIT SR-8585-E INSTRUCTION MANUAL Please read through these instructions before operating this unit. Interface : ATAPI...
-
Page 2: Table Of Contents
DVD-ROM DRIVE UNIT SR-8585-E INSTRUCTION MANUAL Please read through these instructions before operating this unit. Interface : ATAPI TABLE OF CONTENTS IMPORTANT SAFETY NOTICE ................LASER SAFETY INFORMATION ................A-1 INTRODUCTION ......................A-4 1. PRECAUTIONS WHEN OPERATING ..............A-5 1.1 PRECAUTIONS WHEN TRANSPORTING ............A-5 1.2 INSTALLATION LOCATION ................ -
Page 3: Important Safety Notice
IMPORTANT SAFETY NOTICE NOTICE (1) You may not reproduce or transcribe any part of this publication without permission. (2) We reserve the right to revise this document at any time without notice. (3) If you have any questions about this document, contact your sales representative. SAFETY NOTICE (1) To prevent fire or electric shock, do not expose this appliance to rain or moisture. -
Page 4: Laser Safety Information
LASER SAFETY INFORMATION Class 1 LASER Product This equipment is certified to comply with DHHS Rule 21 CFR Chapter 1, Subchapter J in effect as of date of manufacture. Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN60825 for Class 1 laser products. - Page 5 VORSICHT– C A U T I O N – L ASERSTRAHLUNG, LASER RADIATION WHEN OPEN WENN ABDECKUNG GEOFFNET DO NOT STARE INTO BEAM NICHT IN DEN STRAHL BLICKEN ADVARSEL – ADVARSEL– º L ASERSTRALING º º º º NAR DEKSEL APNES LASERSTRALING VED ABNING º...
- Page 6 for DVD for CD LASER Specification LASER Specification Type: Semiconductor laser GaAs Type: Semiconductor laser GaAlAs Wave Length: 658 ± 8 nm Wave Length: 775 ~ 815 nm (Typical 790 nm) θ = 73.7 ° ± 3 ° θ = 53.4 ° ± 3 ° Divergence: Divergence: Output Power:...
-
Page 7: Introduction
INTRODUCTION DVD-ROM is read-only memory using a CD-ROM disc system and an audio compact disc system as a media package which handles digital data. To enjoy audio CD, please insert the Headphone plug into the Headphone jack. This drive unit uses DVD-ROM discs which bear the following mark. This drive unit uses CD-ROM discs which bear the following mark. -
Page 8: Precautions When Operating
CHAPTER 1 PRECAUTIONS WHEN OPERATING 1.1 PRECAUTIONS WHEN TRANSPORTING To avoid damage * Keep the original packing materials for the drive unit. * Before you transport the drive unit, remove the disc from the drive unit and repack the drive unit in its original packing. 1.2 INSTALLATION LOCATION Do not place unit in the following environments. - Page 9 Do not write on, or paste paper to the surface of the disc. Should not paste a large or thick label to the outer back surface (the label side) of the disc, or it generates drive vibration due to imbalance of the disc. Do not store the disc in a place where the temperature is high.
-
Page 10: Parts And Functions
CHAPTER 2 PARTS AND FUNCTIONS 2.1 FRONT VIEW DISC TRAY Accepts a disc. HEAD PHONE JACK Headphone can be connected using a 3.5mm stereo mini plug. VOLUME Adjusts audio output level of Headphone. BUSY INDICATOR Lights when data is being accessed from the disc, or the drive is playing an audio CD. EJECT/LOAD BUTTON Ejects and loads the disc tray. -
Page 11: Connections
CHAPTER 3 CONNECTIONS 3.1 CONNECTING VIEW DC (IN) Connector Interface Connector Jumper Pin DC Power Connector Audio Out Connector Digital Audio Out Connector Jumper Drive-Select (Master/Slave/CSEL) Cable select (CSEL) Interface Cable Slave Master CHAPTER 4 GUIDE TO OPERATION 4.1 INSTALLATIONS •... -
Page 12: General Description
CHAPTER 5 GENERAL DESCRIPTION 5.1 FEATURE SUMMARY Embedded ATAPI Interface. Automatic Loading with tray. Horizontal and Vertical Installation. (Vertical : Vertical installation type only, 12 cm Disc only) Audio Playback Capability. MS-DOS CD-ROM Extensions Available. 5 1/4” Half Height Design. 5.2 SYSTEM SET UP The ATAPI Devices are selected by the Address field in the Drive Select Register. -
Page 13: Error Rates
Access time Random access time (DVD CAV mode) *3 125 ms typical Fullstroke access time (DVD CAV mode) *4 270 ms typical Random access time (CD CAV mode) *5 90 ms typical Fullstroke access time (CD CAV mode) *6 180 ms typical Buffer Size 512 KBytes MTBF... -
Page 14: General Performance
6.4 GENERAL PERFORMANCE Power requirement +5 V 1.0 A +12 V 2.0 A Dimensions (W x H x D) 146 x 41.3 x 190 mm(exclude Front Bezel) Weight 890 g typical 6.5 ENVIRONMENTAL CONDITIONS Operating • Temperature 5 ~ 50 °C •... - Page 15 (This Device Driver is required when reading a DVD-RAM disc under Windows 95.) The SR-8585-E DVD-ROM drive must be installed into your host computer, before installing this device driver. 1. Turn the power of your personal computer on and start up Windows 95 .
- Page 16 6. Select “Install ATAPI-DVD device driver” and press Next on Select Components window. 7. Press Finish on Restart Windows as it is. Your personal computer will automatically restart and install this SR-8585-E device driver. NOTE: This SR-8585-E DVD-ROM drive does not support the FAT formatted DVD-RAM discs.
- Page 17 APPENDIX B. Easy Installation of the Device Driver for DOS / Windows 3.1 The SR-8585-E DVD-ROM drive must be installed into your host computer, before installing this device driver. 1. Turn the power of your personal computer on. If your system automatically loads Windows, you must exit Windows and reach the DOS prompt C:\ .
- Page 18 Weight and dimensions shown are approximate. Specifications are subject to change without notice. LMQT00408...