Jensen MPR420 Installation & Owner's Manual page 7

MPR420
OPERATION
AM/FM Tuner Operation
nn ll
Press TUNE or TUNE to seek to the previous or
Seek Tuning
next strong station.
nn ll
Press and hold TUNE or TUNE to enter manual
Manual Tuning
nn ll
tuning mode, then press TUNE or TUNE
momentarily to change radio frequency up or down one
nn ll
step at a time. Press and hold TUNE or TUNE to
advance quickly.
Press BAND to select between FM1, FM2, FM3, AM1 and
Band
AM2 bands. Up to six presets can be programmed
for each band, enabling up to 18 FM stations and 12 AM
stations to be stored in memory.
Up to 18 FM and 12 AM stations can be stored. To store
Storing Presets
a station, select the desired band and station. Press and
hold the desired preset button (1-6) for more than two
seconds. When stored, the preset number will appear in
the display.
Preset stations can be recalled any time by pressing the
Recalling Presets
corresponding preset button.
Press and hold AS/PS for more than 2 seconds to store
Automatically Store
18 FM stations and 12 AM stations automatically.
Press AS/PS to recall each preset staion that stored in the
Preset Scan Stations
memories in each band.
7